|
|
 |
|
|
|
Audio/Video Matrix Switch routes audio and video from many computers to multiple displays (projectors, monitors, etc.)
and speakers. This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via.
BNC connectors.
|
|
|
|
Features |
|
| Each input can be independently connected to Andy or all outputs. | | Inputs and outputs can be named. | | Features break away audio- audio can be switched independent of video | | Creston compatible. | | Control and configure the switch through Ethernet,serial port or front panel buttons. | | Matrix Control Software with Graphical User Interfaces included. | | Each output provides one video signal and one stereo signal. | | Supports 1920x1200 video resolutions at a refresh rate of 85 Hz. | | Switch VGA video directly. | | Video bandwidth is 200 MHZ or greater, fully loaded. |
|
|
|
|
Specifications |
|
Video Input:
Female 15-pin HD connectors.
Impedance: 75 Ohms.
Video Output:
Female 15-pin HD connectors
1920x1200 video resolution with no degradation.
impedance: 75 Ohms.
Band width:200 Mhz,fully loadedAudio Input.
3.5mm stereo audio jacks.
impedance 10k Ohm.
Maximum Input Level: 1 Vrms or 2.5Vp-p
Audio Output.
3.5mm stereo audio jacks
Drives 8-Ohm speakers.
Unbalanced Gain: user defined.
Frequency Response: 20 Hz to 20 kH,+/-0.5dB.
Total Harmonic Distortion + Noise:0.01% at 1kHz.
Gain Adjustment:-20 dB to + 10 dB in 2 dB steps. |
|
|
|
