|
|
 |
|
|
|
Audio/Video Matrix Switch routes audio and video from many computers to multiple displays (projectors, monitors, etc.) and speakers. This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors.A single computer video output can be routed to one or more monitors. Each video output is buffered from each input, ensuring signal integrity throughout the system. When switching ports, the audio automatically mutes until the video has been synchronized. The audio can be muted on command. |
|
|
|
Features |
|
| Each input can be independently connected to andy or all outputs | | Features break away audio- audio can be switched independent of video | | Supports 1920x1200 video resolutions at a refresh rate of 85 Hz. | | Creston compatible | | Each output provides one video signal and one stereo signal | | Control and configurethe switch through Ehternet,serial port or front panel buttons. | | Inputs and outputs can be named | | Matrix Control Software with Graphical User Interfaceis included | | Switch VGA video directly. | | Video bandwidth is 200 MHZ or greater, fully loaded. |
|
|
|
|
Specifications |
|
Video Input
Female 15-pin HD connectors
Impedance: 75 Ohms
Video Output
Female 15-pin HD connectors
1920x1200 video resolution with no degradation
impedance: 75 Ohms
Band width:200 Mhz,fully loaded
Audio Input
3.5mm stereo audio jacks
impedance 10k Ohm
Maximum Input Level: 1 Vrms or 2.5Vp-p
Audio Output
3.5mm stereo audio jacks
Drives 8-Ohm speakers
Unbalanced Gain: user defined
Frequency Response: 20 Hz to 20 kH,+/-0.5dB
Total Harmonic Distortion + Noise:0.01% at 1kHz
Gain Adjustment:-20 dB to + 10 dB in 2 dB steps
200 mW RMS of continuous power per output
When switching ports, audio mutes until video has been synchronized
|
|
|
|
