Need to run another Cat5e run, but don't have the time or money. A pair of our economic network splitters will allow you to use a single Cat 5E cable run, which would ordinarily only handle a single network connection, as two network connections allowing two computers to connect to the network. Please note that this will require 2 splitters and an extra Hub/Switch or Router port.
100Mbps Data throughput 2 RJ45 jacks and 1 plug. 2 Adapters are required to split a single line
2 RJ45 jacks and 1 plug.100Mbps data transfer rates. Instructions: 1) Find out the number of the cable run and locate the corresponding Patch Panel port. There should be a single patch cable going from that port to a single router port. 2) Unplug the patch cable at the patch panel and replace it with one of the two splitters by plugging the male end of the splitter into the patch panel port. 3) Connect the two ports on the splitter to two ports on the router/switch using two patch cables. 4) Go to the wall outlet at the user location and unplug the single patch cable and replace it with the other splitter. Plug both computers onto the splitter using two patch cables.
People who shopped for the Cat5e Pair Splitter Adapter (2 Splitters are Required) also shopping for these